Images similar. Errors and technical changes reserved.


LED magnifying lamp 3.0 diopter

  • 1 lamp LED 51 lumens (505 lumens out)
  • body color white
  • glass lens 3.0 dioptres
  • expandable with attachment lenses at 4, 6 or 10 dioptres
  • focal length 330 mm
  • lamp power 11 watts
  • voltage 230V
  • with table clamp
  • arm length 1000 mm
  • weight 3000 g

Area of application

Magnifying lamp with a circular LED module, the spring-balanced arm provides maximum vertical and horizontal movement, stays in position.

Technical description

Mounting Type: Table lamp, case color: white (WH), arm length: 100cm, primary lens: 3 diopters, total magnification: 175, light source: LED, 1x10 watts, 505 lumens out, system power (max): 10 watts, 51 lumens per watt , Weight: 2kg, IP protection rating: 20, maximum ambient temperature: 25 degrees Celsius, a fabric cover protects the lens from dust. Glass Lens: 3 Diopters (1.75x Magnification), LED Module: 1 x 10 W, 3 Step Dimmer: 0-50-100 %, Focal Length: 330 mm, 1500 Lux, Color Temperature (CCT): 4000 K, Color Rendering Index (CRI): Ra 80, Crown Glass: Ø 127 mm, Power: 11 W, Voltage: 230 V / 50 Hz, Shutoff: automatic after 4 or 9 h, Arm Length: 1050 mm, Color: schwarz, Weight: 2000 g, Secondary attachment lenses (STAYS) with 4, 6 or 10 diopters can be attached to the crown glass lens. (STAYS: Self-Traction Accessory Yield System)

General information

Risk factor loupes and lighting. At the ESD workstation, sensitive components must not be exposed to an electrostatic field of more than 100 V / cm. There is a high risk due to the use of highly rechargeable materials such as glass or plastic. Above all, loupes and lights are dangerous because they are often used very close to the product. An electrostatic discharge can also occur via the air, it is not always a direct contact necessary. For this reason, only use ESD-safe lighting in accordance with DIN EN 61340-5-1.